Outillage spécifique

Valve seal tool for 8mm diameter valve guide. (#100243 & ##119766) - See notes Below as there are two variations of seals. This tool was designed to overcome the problem of correctly installing valve stem seals. The seal is simple inserted onto the…

Valve seal tool for 8mm diameter valve guide. (#100243 & ##119766) - See notes Below as there are two variations of seals. This tool was designed to overcome the problem of correctly installing valve stem seals. The seal is simple inserted onto the…

Made as per original OEM specification. Hardened & ground bucket tool with serrated finger grips Lever tool made from Chrome Vanadium Steel & chemical blacked. Sold as a set only. Modèles compatibles : 208, 288 GTO, 328, 348, 412, 512 TR/M, 550,…

Greatly improved Hill Engineering version of the 90002600 Maserati tool. Sold as a set only. Modèles compatibles : Maserati 3200 Référence : 900026000

Hill Engineering's unique version of the Ferrari AV2938 Tensioner adjuster tool. We have designed this tool to allow better access to the 17mm Hex bolt that secures the Tensioner bearing. Made from alloy steel and plated for life long protection.…

Spare Stylus for TDC KIT-01 Référence : TDC-ST-01

Spare Plunge clock for TDC KIT-01 Référence : TDC-KIT-CLOCK

Top Dead Center Measurment Tool A must in any serious Ferrari shop - This kit contains 3 individual tools for all the various spark plug thread sizes that Ferrari have used over the years. Due to this kit being aimed at the professional we have…

355 Spark Plug Removal tool - The only way to remove the leads on your 355 - please do not try and remove the leads without one of these! Modèles compatibles : 355 Référence : PRT-01

Solenoid Tool Another part that we have been requested to manufacture due to poor quality items being supplied through the official parts channel. Manufactured from a far superior material than the original factory tool. Modèles compatibles : 360…

456/550/575/612 Oil filter socket tool Used on: 456, 550, 575M, 612 (See product description notes) Modèles compatibles : 456, 550, 575M, 612 Référence : OFT-04

Testarossa , 512TR/M Oil filter socket tool Used on: 512 TR/M, Testarossa (See product description notes) Modèles compatibles : 512 TR/M, Testarossa Référence : OFT-03

Oil filter tool Suitable for: Ferrari #197654 - 348, 355, 360 Ferrari #234742 - 430 Ferrari #195363 - Enzo Maserati #188814 Modèles compatibles : 348, 355, 360, 430, Enzo, Maserati 4200, Maserati Quattroporte Référence : OFT-02

308 328 Oil filter socket tool Used on: 208, 308 GT4 Dino, 308 GTB, 308 QV, 328 (See product description notes) Modèles compatibles : 208, 308 GT4 Dino, 308 GTB, 308 QV, 328 Référence : OFT-01

Improved design utilizing flank drive rather than conventional point drive. Destruction tested against original tool with over 20% improvement. Please note, this tool is designed for head installation only and not intended for removal of…

Used in conjunction with part #95972906 (AV2906) - Wrench Used on: 355, 360, 456, 550, F50 (See product description notes) Modèles compatibles : 355, 360, 456, 550, F50 Référence : 95972905 (AV2905)

Alternative : Use 95972905 & 95972906 Référence : 95972595 (AV2595)

HEAD TOOL SPANNER FOR 308QV, 328, 348, 512TR, Mondial QV, Testarossa, F40 & 288GTO Improved design utilizing flank drive rather than conventional point drive. Please note, this tool is designed for head installation only and not intended for removal…

550 575 612 Flywheel locking tool (Extra tapped holes on main body for fixing bolt stowage) Used on: 550, 575M, 612 (See product description notes) Modèles compatibles : 550, 575M, 612 Référence : 95973546 (AV3546)

360 Locking tool (Identical to the factory AV3207 Tool) Modèles compatibles : 360 Référence : 95973207 (AV3207)

Rototest adaptor nut for Rudge 42 Spline Ferrari with Whitworth Thread (8 T.P.I) Anodised Red - Right Hand Thread (To be used with SOC-02 Tool) Priced Individually Référence : RTA-R42-002RH

Rototest adaptor nut for Rudge 42 Spline Ferrari with Whitworth Thread (8 T.P.I) Anodised Blue - Left Hand Thread (To be used with SOC-02 Tool) Priced Individually Référence : RTA-R42-002LH

Rototest adaptors for Rudge 42 Spline Ferrari (250, 330, 365, 512BB etc) For use with Rototest Chassis Dynamometer 1 x Pair of Adaptors - Made from a single billet of Alloy Steel For use with Rototest Chassis Dynamometers. For more information on…

Rototest adaptor nut for Rudge 32 Spline Ferrari with Whitworth Thread (8 T.P.I) Anodised Red - Right Hand Thread (To be used with SOC-02 Tool) Priced Individually Référence : RTA-R32-002RH