Accueil
Subcategory
View Left Column
505 products
Grid
Grid-2
List
List-2
Catelog
€163.40
€163.40Price
Ring nut tool - 32mm Used on 365 GT4 2+2, 400 & 412 lower timing chain sprocket. This particular ring nut tool is made to order due to very low requirements. (Delivery 7-10 Days) Modèles compatibles : 365 GT4 2+2, 400, 412 Référence : RNT-32
€163.40Price
€316.79
€316.79Price
95973246 - AV3246 Ringnut tool For Mainshaft Shoulder Ring nut on all 360 Gearbox. Modèles compatibles : 360 Référence : 95973246 (AV3246)
€316.79Price
€275.11
€275.11Price
22 Spline Gauge for checking spline wear on 355 Flywheel (and Crank) This gauge has been specially made to check the wear on the female spline of the 355 flywheels. The female spline has a tendency to wear bell mouthed and thus causes extreme stress…
€275.11Price
€91.70
€91.70Price
Valve seal tool for 6mm diameter valve guide. (355/360/430 & others with 6mm diameter stem) This tool was designed to overcome the problem of correctly installing valve stem seals. The seal is simple inserted onto the tool (see reference picture…
€91.70Price
€91.70
€91.70Price
Valve seal tool for 7mm diameter valve guide. (348 & others with 7mm diameter stem) This tool was designed to overcome the problem of correctly installing valve stem seals. The seal is simple inserted onto the tool (see reference picture below) and…
€91.70Price
€91.70
€91.70Price
Valve seal tool for 8mm diameter valve guide. (#100243 & ##119766) - See notes Below as there are two variations of seals. This tool was designed to overcome the problem of correctly installing valve stem seals. The seal is simple inserted onto the…
€91.70Price
€91.70
€91.70Price
Valve seal tool for 8mm diameter valve guide. (#100243 & ##119766) - See notes Below as there are two variations of seals. This tool was designed to overcome the problem of correctly installing valve stem seals. The seal is simple inserted onto the…
€91.70Price
€153.39
€153.39Price
Made as per original OEM specification. Hardened & ground bucket tool with serrated finger grips Lever tool made from Chrome Vanadium Steel & chemical blacked. Sold as a set only. Modèles compatibles : 208, 288 GTO, 328, 348, 412, 512 TR/M, 550,…
€153.39Price
Greatly improved Hill Engineering version of the 90002600 Maserati tool. Sold as a set only. Modèles compatibles : Maserati 3200 Référence : 900026000
€325.14Price
€91.70
€91.70Price
Hill Engineering's unique version of the Ferrari AV2938 Tensioner adjuster tool. We have designed this tool to allow better access to the 17mm Hex bolt that secures the Tensioner bearing. Made from alloy steel and plated for life long protection.…
€91.70Price
€46.68
€46.68Price
€141.73
€141.73Price
€481.87Price
Top Dead Center Measurment Tool A must in any serious Ferrari shop - This kit contains 3 individual tools for all the various spark plug thread sizes that Ferrari have used over the years. Due to this kit being aimed at the professional we have…
€481.87Price
€325.14
€325.14Price
Solenoid Tool Another part that we have been requested to manufacture due to poor quality items being supplied through the official parts channel. Manufactured from a far superior material than the original factory tool. Modèles compatibles : 360…
€325.14Price


























































